Ethylene Oxide Emission and Elimination: Overview of pollution control technology evolution

whitePaper | November 27, 2019

Process safety information (PSI) is the keystone of a PSM Program as it tells us what we are dealing with from both the equipment and the process standpoint. In order to be in compliance with the OSHA PSMS regulations the process safety information should include information pertaining to the hazards of the highly hazardous chemicals used or produced by the process, information pertaining to the technology of the process and information and concerning the equipment in the process.

whitePaper | January 30, 2020

Our first pilot plant uses the Dawn technology to convert non-food biomass like wood chips or agricultural waste into industrial sugars and lignin. These sugars are turned into chemical feedstocks to make plastics. Currently, we are building a second demonstration plant, which converts sugar into plant-based mono-ethylene glycol (MEG), which is used in the production of chemicals and plastics. A building block for the production of bioplastics in Chemical Cluster Emmen. It can be used to produce 100% bio-PET.

whitePaper | June 15, 2021

When properly used, the hazardous area classification system makes for a safer work environment. Too often, however, hazard classes are specified without concern for the significantly higher design and procurement costs they bring. In many cases, an open mind and a little ingenuity can avoid excessive costs for compressors and other equipment, without compromising safety. This white paper explains hazardous classification systems commonly used in the chemical industry and outlines considerations for installing compressed air equipment in these areas

whitePaper | September 12, 2022

The U.S. National Climate Assessment and the Intergovernmental Panel on Climate Change (IPCC) show that reducing global anthropogenic greenhouse gas (GHG).

whitePaper | April 11, 2022

Chemical recycling is the only way to recycle large volumes of flexible plastics packaging and other mixed polyethylene/polypropylene into food grade PE/PP recycled content. Once operating at industrial scale, chemical recycling has the potential to recycle post-consumer flexible plastics “in practice and at scale».

whitePaper | July 21, 2022

Oil and gas operations require 24/7/365 monitoring to maintain safety, efficiency, and productivity. Unfortunately, the processes and systems involved