THE FUTURE OF PLASTIC RECYCLING

The future of the plastic recycling market will mostly be a combination of mechanical recycling, depolymerization, and pyrolysis. Waste availability will determine which becomes dominant.

Spotlight

Intact Adhesives

Intact Adhesives manufacture high performance, high quality adhesives that improve productivity, reduce overall costs and keep production going. With our technical expertise Intact can help you solve difficult bonding challenges and help you bring new innovative products to the market. We are the only UK adhesive manufacturer offering a unique combination of adhesives, applicators and servicing support.

OTHER ARTICLES
Chemical Technology

Resin and Polymeric Binders for Inks

Article | August 2, 2022

The market size for polymeric and resin binders in the global printing ink marketwas estimated to be over 1,200,000 MT in 2020, with a CAGR of about five percent. A major driver of this growth comes from the packaging industry, due to increases in consumer spending and online shopping, as well as demand for processed and packaged foods and beverages. In addition, increased use of water-based inks is promoting market growth, off-setting environmental and health concerns regarding solvent-based inks in addition to strict environmental protection policies. Water-based inks are projected to overtake solvent-based inks due to environmental regulations, the reduction of volatile organic compounds (VOCs) in the pressroom, and improvements in overall print quality. Ink formulations are complex mixtures, consisting of four basic component classes: pigments, polymeric binder resins, solvents or an aqueous dispersant media, and additives, such as surfactants, waxes, and rheology modifiers that enhance print quality. The purpose of the resin binder is to disperse and carry the ink pigment to the substrate, stabilize the pigment and additives dispersion to prevent settling, and provide print properties such as ink transfer behavior, setting, and drying characteristics. The binder also contributes surface appearance and gloss, strength and flexibility, chemical and solvent resistance, and also rub resistance. Ink binders can be categorized into the following polymer and resin types: acrylics, polyurethanes, polyamides, modified resins, hydrocarbon resins, and modified cellulosics.

Read More
Chemical Management

Future-Proofing the Chemical Industry with Digitalization

Article | July 22, 2021

Over the next five to seven years, the chemical sector will place a greater emphasis on sustainability, and digitization will play a significant part in this. Reducing resource use, pollution, energy consumption, and waste are some of its main applications. Additionally, it will increase demand for a circular economy supported by IoT, AI, and other digital technologies. Some of the systems now in place or being used in the sector include autonomous solutions that enable lower energy usage, dispatching systems for effective logistics and strategies for sustainable power and fuel consumption. Chemical players making the switch to digital platforms have a chance to triumph if they move swiftly and update their operational models in accordance with a few common success characteristics. In fact, according to our study, making the correct decisions can increase total earnings before interest, taxes, depreciation, and amortization by 3 percent or more (EBITDA). The Next Step of Operational Excellence The same level of transformation is available with digital technology for optimal performance, together with success-enabling measures. The same level of corporate participation and realignment will also be necessary for the effective implementation of digital technology. Finance and telecoms were early leaders in adopting digital technology faster than the chemical sector, which has just recently started to move in more significant numbers toward digitalization. A circular economy in the sector is also being enabled by the use and evaluation of digital technology. The "Right to Fix" movement is being driven by governments and legislators in Europe and the US, and small and medium-sized businesses in the industry are expected to invest in technology that makes it easier to repair electronic items with the least amount of waste. On a side note, by enabling the re-use of resources and products throughout the supply chain, digitalization with lean manufacturing (LM) would enable businesses to improve operational excellence and create value, thereby supporting the circular economy goal. Conclusion Given its extensive safety and regulatory requirements, the chemical sector has evolved slowly. However, as the global economy changes, some skills will become obsolete and others essential. The interconnectedness of people, processes, and technology, as well as the requirement for real-time insight at the levels closest to the action, are among the basic principles of Industry 4.0. These values have existed for some time and are an extension of our teams' current operational excellence initiatives. Digital transformation is not a technology endpoint but rather the following stage in the process and business evolution as the chemicals industry advances continuously.

Read More
Chemical Management

Closing the loop: Real-time measurement of oil in water for process facilities

Article | July 8, 2022

When an oilfield’s reservoir pressure is depleted during primary recovery, additional oil can be recovered by recycling the produced water and injecting it back into the reservoir. Water management is critical for such water and water-alternating-gas (WAG) floods. In its Permian basin operations, Occidental recovers, recycles, and re-injects large volumes of water for its enhanced oil recovery (EOR) operations. With real-time monitoring of oil in water (OiW) delivering reliable and continuous data, Occidental identified a way to optimize the recovery process and is working with NOV to expand the use of OiW monitoring equipment.

Read More
Chemical Technology

Organic Oil Recovery improves productivity of existing reservoirs

Article | May 10, 2021

MAY 2021 ///Vol 242 No. 5 FEATURES Organic Oil Recovery improves productivity of existing reservoirs A transitional technology producing excellent results in extracting hard-to-reach oil is attracting the attention of many large operators. Ancient, resident microbes are used to liberate large oil deposits in depleted reservoirs, thanks to science uncovered by studying the humble Australian koala. Roger Findlay, Organic Oil Recovery It began in almost outlandish fashion, with a scientist’s fascination with the complex digestive system of an Australian marsupial, the koala. Today, it has evolved into a green technology that is helping major producers around the world potentially reach billions of dollars of oil that they feared they could never access or bring to the surface. As the pressure on the oil and gas industry continues to grow, to find new ways to operate with less impact on the environment, Organic Oil Recovery (OOR) is reducing the need for further exploration. Instead, it is helping producers focus on the reservoirs already in situ to extract even more precious resource—at very low cost—from deep below the ground or seas, across a myriad of jurisdictions and geographies.

Read More

Spotlight

Intact Adhesives

Intact Adhesives manufacture high performance, high quality adhesives that improve productivity, reduce overall costs and keep production going. With our technical expertise Intact can help you solve difficult bonding challenges and help you bring new innovative products to the market. We are the only UK adhesive manufacturer offering a unique combination of adhesives, applicators and servicing support.

Related News

NGOs file suit over transparency of TSCA new chemicals programme

Chemical Watch | March 18, 2020

A coalition of NGOs has sued the US EPA over an alleged lack of transparency in the TSCA new chemicals programme, which "thwart[s] the ability of the public to be informed and to provide input". According to a complaint filed by five environmental nonprofits in federal court today, the EPA has operated its TSCA premanufacture review process in a "black box, denying the public information to which they are legally entitled". Having access to timely information, they contend, is necessary to ensure the members they represent "are able to provide input on the potential risks of new chemicals and the need for protections from those risks prior to completion of EPA’s reviews." And they therefore have asked the court to ensure that the EPA complies with TSCA’s disclosure provisions, including by requiring that it:

Read More

ACC to Trump, governors: Keep chemical industry going during coronavirus crisis

S&P Global | March 18, 2020

The US chemical industry's trade group told President Donald Trump and state governors this week that its sector must maintain operations as the coronavirus outbreak spreads to ensure supply of chemicals needed for disinfectants, plastics for food preservation and medical equipment, and staples like diapers and soap. "The role of chemistry is particularly important today, as chemicals enable countless products that will be needed to support good hygiene and treat those who are infected with the coronavirus in the weeks and months ahead," American Chemistry Council President and CEO Chris Jahn said in a letter to Trump and governors late Tuesday. Efforts to hinder the spread of coronavirus have included cancellations of major sporting events, concerts, conferences, parades, and other large gatherings, as well as closures of bars and limiting restaurants to takeout and deliveries. Companies have increasingly sent employees to work from their homes, while hospitals, grocery stores, and drug stores work to keep up with demand for care and products.

Read More

How small chemical company leaders are dealing with the coronavirus

C&EN | March 17, 2020

As measures to contain the coronavirus—SARS-CoV-2—sweep across the US, the heads of privately owned chemical and instrument companies find themselves in uncharted territory trying to keep their companies going and their employees safe. C&EN reached out to CEOs of several such firms to learn what they are doing to keep business moving forward. We heard stories about setbacks, as expected supplies didn’t come through, but also small triumphs, as needed safety equipment was finally found. Overall, these leaders are keeping a close eye on supplies while planning for the real possibility that orders will drop in the coming months. Keeping staff healthy and maintaining continuity in customer service are the top priorities at Boron Specialties. “We are a pretty small facility, seven people &on-site&, so as best as we can we’re isolating,” CEO and founder Beth Bosley says.

Read More

NGOs file suit over transparency of TSCA new chemicals programme

Chemical Watch | March 18, 2020

A coalition of NGOs has sued the US EPA over an alleged lack of transparency in the TSCA new chemicals programme, which "thwart[s] the ability of the public to be informed and to provide input". According to a complaint filed by five environmental nonprofits in federal court today, the EPA has operated its TSCA premanufacture review process in a "black box, denying the public information to which they are legally entitled". Having access to timely information, they contend, is necessary to ensure the members they represent "are able to provide input on the potential risks of new chemicals and the need for protections from those risks prior to completion of EPA’s reviews." And they therefore have asked the court to ensure that the EPA complies with TSCA’s disclosure provisions, including by requiring that it:

Read More

ACC to Trump, governors: Keep chemical industry going during coronavirus crisis

S&P Global | March 18, 2020

The US chemical industry's trade group told President Donald Trump and state governors this week that its sector must maintain operations as the coronavirus outbreak spreads to ensure supply of chemicals needed for disinfectants, plastics for food preservation and medical equipment, and staples like diapers and soap. "The role of chemistry is particularly important today, as chemicals enable countless products that will be needed to support good hygiene and treat those who are infected with the coronavirus in the weeks and months ahead," American Chemistry Council President and CEO Chris Jahn said in a letter to Trump and governors late Tuesday. Efforts to hinder the spread of coronavirus have included cancellations of major sporting events, concerts, conferences, parades, and other large gatherings, as well as closures of bars and limiting restaurants to takeout and deliveries. Companies have increasingly sent employees to work from their homes, while hospitals, grocery stores, and drug stores work to keep up with demand for care and products.

Read More

How small chemical company leaders are dealing with the coronavirus

C&EN | March 17, 2020

As measures to contain the coronavirus—SARS-CoV-2—sweep across the US, the heads of privately owned chemical and instrument companies find themselves in uncharted territory trying to keep their companies going and their employees safe. C&EN reached out to CEOs of several such firms to learn what they are doing to keep business moving forward. We heard stories about setbacks, as expected supplies didn’t come through, but also small triumphs, as needed safety equipment was finally found. Overall, these leaders are keeping a close eye on supplies while planning for the real possibility that orders will drop in the coming months. Keeping staff healthy and maintaining continuity in customer service are the top priorities at Boron Specialties. “We are a pretty small facility, seven people &on-site&, so as best as we can we’re isolating,” CEO and founder Beth Bosley says.

Read More

Events