Researchers break down plastic using sunlight

Researchers at Singapore's Nanyang Technological University this week said they have found a way to use sunlight to turn consumer plastic into a valuable chemical that could generate clean power. Speaking in a university news release, the team said it dissolved polyethylene in a solution that contained a vanadium-based catalyst.

Spotlight

Synalloy Chemicals

Synalloy Corporation operates chemical factories in Cleveland, TN and Fountain Inn, SC near Greenville. The facilities offer similar capabilities, each providing back up of critical production processes for the other. The two factories comprise over 300,000 square feet, plus additional off campus warehousing. Synalloy produces chemical intermediates that are sold to chemical distributors and formulators, and offers an extensive array of contract manufacturing services.

OTHER ARTICLES
Chemical Management

Resin and Polymeric Binders for Inks

Article | July 8, 2022

The market size for polymeric and resin binders in the global printing ink marketwas estimated to be over 1,200,000 MT in 2020, with a CAGR of about five percent. A major driver of this growth comes from the packaging industry, due to increases in consumer spending and online shopping, as well as demand for processed and packaged foods and beverages. In addition, increased use of water-based inks is promoting market growth, off-setting environmental and health concerns regarding solvent-based inks in addition to strict environmental protection policies. Water-based inks are projected to overtake solvent-based inks due to environmental regulations, the reduction of volatile organic compounds (VOCs) in the pressroom, and improvements in overall print quality. Ink formulations are complex mixtures, consisting of four basic component classes: pigments, polymeric binder resins, solvents or an aqueous dispersant media, and additives, such as surfactants, waxes, and rheology modifiers that enhance print quality. The purpose of the resin binder is to disperse and carry the ink pigment to the substrate, stabilize the pigment and additives dispersion to prevent settling, and provide print properties such as ink transfer behavior, setting, and drying characteristics. The binder also contributes surface appearance and gloss, strength and flexibility, chemical and solvent resistance, and also rub resistance. Ink binders can be categorized into the following polymer and resin types: acrylics, polyurethanes, polyamides, modified resins, hydrocarbon resins, and modified cellulosics.

Read More
Chemical Technology

The multi-million dollar polymers opportunity: continued big regional price differentials

Article | June 6, 2022

POLYMER BUYERS outside northeast (NEA) and southeast Asia (SEA) have a big opportunity to save millions of dollars on procurement costs during the rest of this year through purchasing more from the two regions.The opportunity has arisen because I believe that NEA and SEA polymer prices will remain very cheap relative to most of the world until at least the end of 2021. NEA comprises China, Japan, Taiwan and South Korea. Our definition of the SEA region is Cambodia, Indonesia, Malaysia, Myanmar, the Philippines, Singapore, Thailand and Vietnam.NEA and SEA producers can also make a lot of money by constantly monitoring and acting on strong arbitrage opportunities in other regions. As supply disruptions in the US look likely to continue, Europe and South & Central America seem particularly good opportunities for both buyers and producers.Before we discuss why I see NEA and SEA remaining cheap relative to most of the rest of the world until at least the end of the year, let us consider in more detail the size of the prize, starting with the resin buyers.

Read More
Chemical Technology

IoT in Chemical market trends you Can’t miss in 2020: Here’s What Will Happen in the near future?

Article | July 20, 2022

Global IoT in Chemical market research report provides the newest industry data and industry future trends. It allows you to identify the products and end users driving Revenue growth and profitability. The IoT in Chemical industry report lists the leading competitors and provides the game-changing strategic analysis of the key factors driving the market. The report includes the forecasts by 2020-2028, analysis by 2014-2019, and discussion of important industry trends, market size, market share predictions and profiles of the top IoT in Chemical industry players.

Read More

THE BENEFITS OF CHEMICAL FOAMERS, AND HOW BEST TO USE THEM TO MAXIMISE PRODUCTION

Article | April 14, 2020

Downhole fluid build-up coupled with a drop in reservoir pressure can lead to the rapid decline of gas production rates, and can ultimately result in a well ceasing production. While there are many ways to deliquify a well to maximise production, chemical foamers can be incredibly effective and well worth considering. In this blog post, Kevin Lonie shares some of the benefits of using chemical foamers, and provides insights and advice around how best to use them… “Foamers are a much cheaper option than alternative solutions, such as mechanical lifts, and there is very little risk associated with their usage. If a foamer doesn’t work, it won’t make the well worse - so often we see clients giving them a go before opting for more expensive methods, in the hope that they produce the desired results. And we have seen their success over and over again.”

Read More

Spotlight

Synalloy Chemicals

Synalloy Corporation operates chemical factories in Cleveland, TN and Fountain Inn, SC near Greenville. The facilities offer similar capabilities, each providing back up of critical production processes for the other. The two factories comprise over 300,000 square feet, plus additional off campus warehousing. Synalloy produces chemical intermediates that are sold to chemical distributors and formulators, and offers an extensive array of contract manufacturing services.

Related News

NGOs file suit over transparency of TSCA new chemicals programme

Chemical Watch | March 18, 2020

A coalition of NGOs has sued the US EPA over an alleged lack of transparency in the TSCA new chemicals programme, which "thwart[s] the ability of the public to be informed and to provide input". According to a complaint filed by five environmental nonprofits in federal court today, the EPA has operated its TSCA premanufacture review process in a "black box, denying the public information to which they are legally entitled". Having access to timely information, they contend, is necessary to ensure the members they represent "are able to provide input on the potential risks of new chemicals and the need for protections from those risks prior to completion of EPA’s reviews." And they therefore have asked the court to ensure that the EPA complies with TSCA’s disclosure provisions, including by requiring that it:

Read More

ACC to Trump, governors: Keep chemical industry going during coronavirus crisis

S&P Global | March 18, 2020

The US chemical industry's trade group told President Donald Trump and state governors this week that its sector must maintain operations as the coronavirus outbreak spreads to ensure supply of chemicals needed for disinfectants, plastics for food preservation and medical equipment, and staples like diapers and soap. "The role of chemistry is particularly important today, as chemicals enable countless products that will be needed to support good hygiene and treat those who are infected with the coronavirus in the weeks and months ahead," American Chemistry Council President and CEO Chris Jahn said in a letter to Trump and governors late Tuesday. Efforts to hinder the spread of coronavirus have included cancellations of major sporting events, concerts, conferences, parades, and other large gatherings, as well as closures of bars and limiting restaurants to takeout and deliveries. Companies have increasingly sent employees to work from their homes, while hospitals, grocery stores, and drug stores work to keep up with demand for care and products.

Read More

How small chemical company leaders are dealing with the coronavirus

C&EN | March 17, 2020

As measures to contain the coronavirus—SARS-CoV-2—sweep across the US, the heads of privately owned chemical and instrument companies find themselves in uncharted territory trying to keep their companies going and their employees safe. C&EN reached out to CEOs of several such firms to learn what they are doing to keep business moving forward. We heard stories about setbacks, as expected supplies didn’t come through, but also small triumphs, as needed safety equipment was finally found. Overall, these leaders are keeping a close eye on supplies while planning for the real possibility that orders will drop in the coming months. Keeping staff healthy and maintaining continuity in customer service are the top priorities at Boron Specialties. “We are a pretty small facility, seven people &on-site&, so as best as we can we’re isolating,” CEO and founder Beth Bosley says.

Read More

NGOs file suit over transparency of TSCA new chemicals programme

Chemical Watch | March 18, 2020

A coalition of NGOs has sued the US EPA over an alleged lack of transparency in the TSCA new chemicals programme, which "thwart[s] the ability of the public to be informed and to provide input". According to a complaint filed by five environmental nonprofits in federal court today, the EPA has operated its TSCA premanufacture review process in a "black box, denying the public information to which they are legally entitled". Having access to timely information, they contend, is necessary to ensure the members they represent "are able to provide input on the potential risks of new chemicals and the need for protections from those risks prior to completion of EPA’s reviews." And they therefore have asked the court to ensure that the EPA complies with TSCA’s disclosure provisions, including by requiring that it:

Read More

ACC to Trump, governors: Keep chemical industry going during coronavirus crisis

S&P Global | March 18, 2020

The US chemical industry's trade group told President Donald Trump and state governors this week that its sector must maintain operations as the coronavirus outbreak spreads to ensure supply of chemicals needed for disinfectants, plastics for food preservation and medical equipment, and staples like diapers and soap. "The role of chemistry is particularly important today, as chemicals enable countless products that will be needed to support good hygiene and treat those who are infected with the coronavirus in the weeks and months ahead," American Chemistry Council President and CEO Chris Jahn said in a letter to Trump and governors late Tuesday. Efforts to hinder the spread of coronavirus have included cancellations of major sporting events, concerts, conferences, parades, and other large gatherings, as well as closures of bars and limiting restaurants to takeout and deliveries. Companies have increasingly sent employees to work from their homes, while hospitals, grocery stores, and drug stores work to keep up with demand for care and products.

Read More

How small chemical company leaders are dealing with the coronavirus

C&EN | March 17, 2020

As measures to contain the coronavirus—SARS-CoV-2—sweep across the US, the heads of privately owned chemical and instrument companies find themselves in uncharted territory trying to keep their companies going and their employees safe. C&EN reached out to CEOs of several such firms to learn what they are doing to keep business moving forward. We heard stories about setbacks, as expected supplies didn’t come through, but also small triumphs, as needed safety equipment was finally found. Overall, these leaders are keeping a close eye on supplies while planning for the real possibility that orders will drop in the coming months. Keeping staff healthy and maintaining continuity in customer service are the top priorities at Boron Specialties. “We are a pretty small facility, seven people &on-site&, so as best as we can we’re isolating,” CEO and founder Beth Bosley says.

Read More

Events