Keller oil, gas & chemical solutions

Planned LNG (liquefied natural gas) storage facilities may require ground improvement to increase soil bearing capacity and control settlement, deep foundations to transfer loads to competent bearing ground, or drainage to accelerate the consolidation of saturated soils before construction.

Spotlight

Enerkem

Enerkem produces advanced biofuels and renewable chemicals from waste. Its exclusive disruptive proprietary technology converts non-recyclable municipal solid waste into methanol, ethanol and other widely used chemical intermediates. Enerkem's facilities are built as prefabricated systems based on the company's modular manufacturing infrastructure that can be deployed globally. Enerkem's technology helps diversify the energy mix and make everyday products greener, while offering a smart, sustainable alternative to landfilling and incineration.

OTHER ARTICLES
Chemical Technology

Developing pre-rig solutions that are greener, safer and more efficient

Article | August 8, 2022

MAY 2021 ///Vol 242 No. 5 FEATURES Developing pre-rig solutions that are greener, safer and more efficient There is an increased focus in the oil and gas sector to look further afield to opportunities presented in deepwater locations. Because of this, finding cost-efficient solutions and overcoming the associated challenges that arise below 1,000 ft will be vital for the success of new activity. Jostein Aleksandersen, Neodrill There is an increased focus in the oil and gas sector to look further afield to opportunities presented in deepwater locations. Because of this, finding cost-efficient solutions and overcoming the associated challenges that arise below 1,000 ft will be vital for the success of new activity. All those currently—and those considering—operating in deepwater fields will have an awareness of the general challenges that are presented at such depths. From considerations relating to vast increases in pressure, to the potential for increased drilling time and days spent offshore, there are several hurdles that follow when operating in what are often challenging well environments. In addition, suitable solutions also must support the industry drive to reduce emissions by offering a more carbon-efficient approach.

Read More
Chemical Management

The Digital Transformation of the Chemical Industry: The Key Trends

Article | July 8, 2022

From novel process technologies to sustainable plastics— the chemical industry is scaling up its digital initiatives. This has opened new doors for organizations to explore opportunities to increase efficiency and streamline the process. Admittedly, the chemical industry has been a little slower in implementing digital transformation. But COVID-19 has vastly increased the momentum of digitization among chemical plants. According to a KPMG survey, 96% of industry CEOs saw digital transformation accelerate in their organizations, with 48 percent saying it advanced by a few years. In addition, according to a recent Manufacturing Leadership Council (MLC) survey, 82% of respondents agreed that the pandemic had "created a new sense of urgency" in driving investment in new technologies and digitalization. Digital transformation solutions offer tremendous potential in the chemical sector. It can play a significant role in driving more value. So let's dig deeper and look at key technologies in bringing digital transformation to the chemical industry. Circular Economy Chemical manufacturers cannot exist within their own four walls any longer. They recognize the importance of working with their customers and other businesses and organizations to conserve resources and protect the environment. Chemical companies may source raw materials from recyclers as part of a circular economy, which necessitates fool proof solutions to confirm their quality and availability. Circular economy consortiums may advocate for reducing environmental threats such as ocean plastics or exposure to hazardous chemicals, opening up new avenues for innovation. Customers are constantly looking for new ways to reduce waste and protect their ecosystems. For example, farmers may benefit from solutions that can instantly analyze soil quality, weather, and crops to determine the best products and schedule for applying fertilizers, crop protectants, or new seeds. Using this data, they use only what they need, generate less waste, and maximize output. Error-Proof Operations Chemical firms are also embracing technology to achieve operational excellence. They've discovered the benefits of using machine learning andIoT technologies to automate standard back-end processes. Technologies such as these reduce the need for human intervention — and thus the possibility of human error. Blockchain technology can also significantly reduce counterfeit chemicals' use, which is especially important for chemical manufacturers who supply products to the pharmaceutical or agricultural industries. In addition, blockchain technology can enable track-and-trace processes that require less work and waste while protecting the enterprise's reputation. Staying Sharp in the Dynamic Market Staying agile in an uncertain M&A environment is a top priority for some businesses. For example, chemical firms must be able to quickly divest assets, adjust portfolios, and adapt operations in response to market changes. Technology can provide executives with the visibility into operations, shipments, and market conditions required to make critical decisions and remain agile. Data Analytics The chemical industry is leveraging cloud-based storage systems to store and share confidential data anytime and anywhere. Additionally, data analytics solutions can analyze all the data effectively to provide valuable insights to the industry. This will help you make meaningful decisions in real-time.

Read More
Chemical Technology

Petrochemicals markets complexity is only going to grow and grow

Article | July 20, 2022

NICE WORK, if you get can get it. A trucking company in Fort Worth, Texas, is offering to pay experienced drivers $14,000 a week – $728,000 a year – as the US struggles with a nationwide shortage of truckers or lorry drivers. This reminds me of perhaps an apocryphal tale, from the height of the last Australian mining boom. Before iron ore prices collapsed in late 2014, there was a story about workers at mining site road junctions who operated manual “Stop and Go” signs. They were said to be earning more than Australian dollar (A$) 200,000 a year. Before you pack in your job as, say, a petrochemicals sales manager and head to Texas or mine sites in Western Australia, there is the risk that when you arrive at the door of your new prospective employer, the bubble might have already burst. This is assuming we are in bubble conditions.The pressure is clearly building in petrochemicals and other commodity markets as prices in some regions remain at record highs or continue to rise. Today’s prices are the results of shortages of commodities supply (for example in petrochemicals, an outcome of the US winter storms), very strong demand and supply chain disruptions.I am beginning to believe that the latter is the biggest reason for commodity price inflation which is feeding through into sharp rises in the cost of finished goods – and a lack of goods availability. It is delivering and manufacturing enough stuff that seems to be at the heart of today’s problems due to shortages of everything from container freight space and semiconductors to wooden pallets, tin cans, metal drums, cardboard – and US truck drivers.

Read More
Chemical Technology

Future-Proofing the Chemical Industry with Digitalization

Article | July 14, 2022

Over the next five to seven years, the chemical sector will place a greater emphasis on sustainability, and digitization will play a significant part in this. Reducing resource use, pollution, energy consumption, and waste are some of its main applications. Additionally, it will increase demand for a circular economy supported by IoT, AI, and other digital technologies. Some of the systems now in place or being used in the sector include autonomous solutions that enable lower energy usage, dispatching systems for effective logistics and strategies for sustainable power and fuel consumption. Chemical players making the switch to digital platforms have a chance to triumph if they move swiftly and update their operational models in accordance with a few common success characteristics. In fact, according to our study, making the correct decisions can increase total earnings before interest, taxes, depreciation, and amortization by 3 percent or more (EBITDA). The Next Step of Operational Excellence The same level of transformation is available with digital technology for optimal performance, together with success-enabling measures. The same level of corporate participation and realignment will also be necessary for the effective implementation of digital technology. Finance and telecoms were early leaders in adopting digital technology faster than the chemical sector, which has just recently started to move in more significant numbers toward digitalization. A circular economy in the sector is also being enabled by the use and evaluation of digital technology. The "Right to Fix" movement is being driven by governments and legislators in Europe and the US, and small and medium-sized businesses in the industry are expected to invest in technology that makes it easier to repair electronic items with the least amount of waste. On a side note, by enabling the re-use of resources and products throughout the supply chain, digitalization with lean manufacturing (LM) would enable businesses to improve operational excellence and create value, thereby supporting the circular economy goal. Conclusion Given its extensive safety and regulatory requirements, the chemical sector has evolved slowly. However, as the global economy changes, some skills will become obsolete and others essential. The interconnectedness of people, processes, and technology, as well as the requirement for real-time insight at the levels closest to the action, are among the basic principles of Industry 4.0. These values have existed for some time and are an extension of our teams' current operational excellence initiatives. Digital transformation is not a technology endpoint but rather the following stage in the process and business evolution as the chemicals industry advances continuously.

Read More

Spotlight

Enerkem

Enerkem produces advanced biofuels and renewable chemicals from waste. Its exclusive disruptive proprietary technology converts non-recyclable municipal solid waste into methanol, ethanol and other widely used chemical intermediates. Enerkem's facilities are built as prefabricated systems based on the company's modular manufacturing infrastructure that can be deployed globally. Enerkem's technology helps diversify the energy mix and make everyday products greener, while offering a smart, sustainable alternative to landfilling and incineration.

Related News

NGOs file suit over transparency of TSCA new chemicals programme

Chemical Watch | March 18, 2020

A coalition of NGOs has sued the US EPA over an alleged lack of transparency in the TSCA new chemicals programme, which "thwart[s] the ability of the public to be informed and to provide input". According to a complaint filed by five environmental nonprofits in federal court today, the EPA has operated its TSCA premanufacture review process in a "black box, denying the public information to which they are legally entitled". Having access to timely information, they contend, is necessary to ensure the members they represent "are able to provide input on the potential risks of new chemicals and the need for protections from those risks prior to completion of EPA’s reviews." And they therefore have asked the court to ensure that the EPA complies with TSCA’s disclosure provisions, including by requiring that it:

Read More

ACC to Trump, governors: Keep chemical industry going during coronavirus crisis

S&P Global | March 18, 2020

The US chemical industry's trade group told President Donald Trump and state governors this week that its sector must maintain operations as the coronavirus outbreak spreads to ensure supply of chemicals needed for disinfectants, plastics for food preservation and medical equipment, and staples like diapers and soap. "The role of chemistry is particularly important today, as chemicals enable countless products that will be needed to support good hygiene and treat those who are infected with the coronavirus in the weeks and months ahead," American Chemistry Council President and CEO Chris Jahn said in a letter to Trump and governors late Tuesday. Efforts to hinder the spread of coronavirus have included cancellations of major sporting events, concerts, conferences, parades, and other large gatherings, as well as closures of bars and limiting restaurants to takeout and deliveries. Companies have increasingly sent employees to work from their homes, while hospitals, grocery stores, and drug stores work to keep up with demand for care and products.

Read More

How small chemical company leaders are dealing with the coronavirus

C&EN | March 17, 2020

As measures to contain the coronavirus—SARS-CoV-2—sweep across the US, the heads of privately owned chemical and instrument companies find themselves in uncharted territory trying to keep their companies going and their employees safe. C&EN reached out to CEOs of several such firms to learn what they are doing to keep business moving forward. We heard stories about setbacks, as expected supplies didn’t come through, but also small triumphs, as needed safety equipment was finally found. Overall, these leaders are keeping a close eye on supplies while planning for the real possibility that orders will drop in the coming months. Keeping staff healthy and maintaining continuity in customer service are the top priorities at Boron Specialties. “We are a pretty small facility, seven people &on-site&, so as best as we can we’re isolating,” CEO and founder Beth Bosley says.

Read More

NGOs file suit over transparency of TSCA new chemicals programme

Chemical Watch | March 18, 2020

A coalition of NGOs has sued the US EPA over an alleged lack of transparency in the TSCA new chemicals programme, which "thwart[s] the ability of the public to be informed and to provide input". According to a complaint filed by five environmental nonprofits in federal court today, the EPA has operated its TSCA premanufacture review process in a "black box, denying the public information to which they are legally entitled". Having access to timely information, they contend, is necessary to ensure the members they represent "are able to provide input on the potential risks of new chemicals and the need for protections from those risks prior to completion of EPA’s reviews." And they therefore have asked the court to ensure that the EPA complies with TSCA’s disclosure provisions, including by requiring that it:

Read More

ACC to Trump, governors: Keep chemical industry going during coronavirus crisis

S&P Global | March 18, 2020

The US chemical industry's trade group told President Donald Trump and state governors this week that its sector must maintain operations as the coronavirus outbreak spreads to ensure supply of chemicals needed for disinfectants, plastics for food preservation and medical equipment, and staples like diapers and soap. "The role of chemistry is particularly important today, as chemicals enable countless products that will be needed to support good hygiene and treat those who are infected with the coronavirus in the weeks and months ahead," American Chemistry Council President and CEO Chris Jahn said in a letter to Trump and governors late Tuesday. Efforts to hinder the spread of coronavirus have included cancellations of major sporting events, concerts, conferences, parades, and other large gatherings, as well as closures of bars and limiting restaurants to takeout and deliveries. Companies have increasingly sent employees to work from their homes, while hospitals, grocery stores, and drug stores work to keep up with demand for care and products.

Read More

How small chemical company leaders are dealing with the coronavirus

C&EN | March 17, 2020

As measures to contain the coronavirus—SARS-CoV-2—sweep across the US, the heads of privately owned chemical and instrument companies find themselves in uncharted territory trying to keep their companies going and their employees safe. C&EN reached out to CEOs of several such firms to learn what they are doing to keep business moving forward. We heard stories about setbacks, as expected supplies didn’t come through, but also small triumphs, as needed safety equipment was finally found. Overall, these leaders are keeping a close eye on supplies while planning for the real possibility that orders will drop in the coming months. Keeping staff healthy and maintaining continuity in customer service are the top priorities at Boron Specialties. “We are a pretty small facility, seven people &on-site&, so as best as we can we’re isolating,” CEO and founder Beth Bosley says.

Read More

Events