Chemical Technology
Article | July 20, 2022
What follows is an entirely personal take on the challenge of plastic waste and does not represent the views of ICIS or any other expert opinion I have sought out. The views are put forward in the spirit of debate as we move forward, as an industry, to solve the crisis of plastic waste.
Read More
Chemical Management
Article | July 14, 2022
Downhole fluid build-up coupled with a drop in reservoir pressure can lead to the rapid decline of gas production rates, and can ultimately result in a well ceasing production. While there are many ways to deliquify a well to maximise production, chemical foamers can be incredibly effective and well worth considering. In this blog post, Kevin Lonie shares some of the benefits of using chemical foamers, and provides insights and advice around how best to use them… “Foamers are a much cheaper option than alternative solutions, such as mechanical lifts, and there is very little risk associated with their usage. If a foamer doesn’t work, it won’t make the well worse - so often we see clients giving them a go before opting for more expensive methods, in the hope that they produce the desired results. And we have seen their success over and over again.”
Read More
Chemical Technology
Article | August 8, 2022
The market size for polymeric and resin binders in the global printing ink marketwas estimated to be over 1,200,000 MT in 2020, with a CAGR of about five percent. A major driver of this growth comes from the packaging industry, due to increases in consumer spending and online shopping, as well as demand for processed and packaged foods and beverages.
In addition, increased use of water-based inks is promoting market growth, off-setting environmental and health concerns regarding solvent-based inks in addition to strict environmental protection policies. Water-based inks are projected to overtake solvent-based inks due to environmental regulations, the reduction of volatile organic compounds (VOCs) in the pressroom, and improvements in overall print quality.
Ink formulations are complex mixtures, consisting of four basic component classes: pigments, polymeric binder resins, solvents or an aqueous dispersant media, and additives, such as surfactants, waxes, and rheology modifiers that enhance print quality. The purpose of the resin binder is to disperse and carry the ink pigment to the substrate, stabilize the pigment and additives dispersion to prevent settling, and provide print properties such as ink transfer behavior, setting, and drying characteristics. The binder also contributes surface appearance and gloss, strength and flexibility, chemical and solvent resistance, and also rub resistance. Ink binders can be categorized into the following polymer and resin types: acrylics, polyurethanes, polyamides, modified resins, hydrocarbon resins, and modified cellulosics.
Read More
Chemical Management
Article | July 22, 2021
Petrochemical stocks plunged worldwide on 19 July ahead of the Q2 earnings season. The declines were consistent with those in economically sensitive sectors such as steel, copper, automotive and housing,” wrote my ICIS colleague, Joseph Chang, in this Insight article.
Read More