Article | May 19, 2021
The market size for polymeric and resin binders in the global printing ink marketwas estimated to be over 1,200,000 MT in 2020, with a CAGR of about five percent. A major driver of this growth comes from the packaging industry, due to increases in consumer spending and online shopping, as well as demand for processed and packaged foods and beverages.
In addition, increased use of water-based inks is promoting market growth, off-setting environmental and health concerns regarding solvent-based inks in addition to strict environmental protection policies. Water-based inks are projected to overtake solvent-based inks due to environmental regulations, the reduction of volatile organic compounds (VOCs) in the pressroom, and improvements in overall print quality.
Ink formulations are complex mixtures, consisting of four basic component classes: pigments, polymeric binder resins, solvents or an aqueous dispersant media, and additives, such as surfactants, waxes, and rheology modifiers that enhance print quality. The purpose of the resin binder is to disperse and carry the ink pigment to the substrate, stabilize the pigment and additives dispersion to prevent settling, and provide print properties such as ink transfer behavior, setting, and drying characteristics. The binder also contributes surface appearance and gloss, strength and flexibility, chemical and solvent resistance, and also rub resistance. Ink binders can be categorized into the following polymer and resin types: acrylics, polyurethanes, polyamides, modified resins, hydrocarbon resins, and modified cellulosics.
Article | February 21, 2020
Unwanted weeds and vegetation don’t have to be controlled with harmful and dangerous chemicals. There are plenty of non-chemical and organic methods of weed control that are reliable and safe to use, such as Foamstream. Non-chemical weed control is the process of killing weeds without harmful toxins. This is sometimes referred to as cultural or organic weed control, with methods ranging from hoeing and hand-pulling, to hot water and of course, Foamstream.
Article | February 17, 2020
In the last two years, the U.S. Chemical Safety Board (CSB) has launched investigations into seven separate chemical accidents or explosions in the Houston area. Prior to 2018, the CSB only conducted roughly one investigation per year. Investigators believe that the massive increase in accidents which require an investigation by the CSB is due to a variety of factors such as the large number of chemical companies in the Houston area, the age of the infrastructure, and companies being allowed to self-regulate. Many of these explosions and fires have directly led to the deaths of workers, bystanders, millions of dollars in property damage, and the evacuation of tens of thousands of local residents who risk being exposed to toxic chemicals.
Article | March 4, 2020
The issue of environmental sustainability is a major concern for governments and players from the oil and gas industry worldwide. The negative impacts as a result of activities carried out by oil and gas companies have been a major tool not only for the livelihood and health of people but more so to the environment, such as pollution. The risk of environmental pollution, hazards and severity can be and will be reduced with the use of machine learning and deep learning in the years to come. There has been an amazing application in chemical engineering, process safety, process control tuning, advanced dynamic and process optimization. We can see that the Oil and Gas industry when we talk about software especially machine learning solutions didn’t have any innovation in the last 15 years.