ACC Phthalates Automotive Infographic

PVC and acrylic plastisol sealants made with high phthalates are used in wheel wells, underbody coatings and paint to maximize performance and extend the life of the product through the wear-and-tear of everyday vehicle use.

Spotlight

Mistras

In order to succeed in todays competitive business environment, industry must ensure the integrity of their products and processes in the most cost effective fashion possible. MISTRAS Services, formerly CONAM Inspection & Engineering Services, Inc. provides both standard and innovative nondestructive testing solutions to achieve these goals. We utilize the most economical solutions while employing highly trained professionals, state-of-the-art equipment, and sophisticated data analysis. For over 40 years MISTRAS Services has provided comprehensive Non-Destructive Testing services to a broad range of industries. With nationwide laboratories employing over 1000 technicians, our staff has experience with your industry's testing requirements. Constantly driven to be the best, MISTRAS Services' commitment to continuous improvement has helped thousands of companies enhance safety, increase productivity and reduce costs... we would like to do the same for you!

OTHER ARTICLES
Chemical Technology

Pandemic’s third wave seems unlikely to damage global petrochemicals demand

Article | July 20, 2022

Petrochemical stocks plunged worldwide on 19 July ahead of the Q2 earnings season. The declines were consistent with those in economically sensitive sectors such as steel, copper, automotive and housing,” wrote my ICIS colleague, Joseph Chang, in this Insight article.

Read More
Chemical Technology

Southeast polyolefins demand growth could be negative again in 2021

Article | July 14, 2022

BEFORE the pandemic, GDP growth rates in the developing world were always higher than in developed economies.And because developing economies had much lower levels of petrochemicals consumption than their rich counterparts, it meant that the multiples over GDP were higher than in the rich word, where consumption was pretty much saturated. For instance, polyethylene (PE) demand in a developed country such as Germany might have grown at 0.3% times GDP whereas in Indonesia the growth could have been one or more times higher than the rate of growth in GDP.But as The Economist wrote in this 11 July article: “In 2021 the poorest countries, which are desperately short of vaccines, are forecast to grow more slowly than rich countries for only the third time in 25 years.” Might the multiples over GDP growth also be adversely affected in the developing world, trending lower than the historic norms? They will almost certainly remain higher than the rich countries. But here is the thing: as millions more people are pushed back into extreme poverty by the pandemic or are denied the opportunity to achieve middle-income status, I believe that developing-world multiples may well decline.Escaping extreme poverty means being able to, say, afford a whole bottle of shampoo for the first time rather than a single-serve sachet, thereby raising per capita polymers consumption.

Read More
Chemical Management

Global polyethylene demand boom likely, increasing the sustainability challenge

Article | July 14, 2022

IT FEELS LIKE several lifetimes ago. If you recall, way back in November-December 2019 Asian variable cost integrated naphtha-based polyethylene (PE) margins turned negative because of the increase in US capacity. Then in January the following year, deep Asian and Middle East operating rate cuts returned some order to the market. Then, bang, as we all know, the pandemic arrived and turned everything on its head. The pandemic has, in my view, accentuated trends that were already well underway. I believe this means that the supply-driven downturn that started in late 2019 will not return.Long before coronavirus upended everyone’s lives, PE demand was becoming increasingly divorced from GDP growth because of the shifting nature of end-use demand. Booming internet sales was, I believe, a major factor behind the split between the growth of the overall economies in the developed world plus China and PE demand.The average product bought online is dropped 17 times because of the large number of people involved in the logistics chain, according to Forbes. This had led to a surge in demand for protective packaging made not from PE and other polymers such as polypropylene, expandable polystyrene and PET films (I will look at their demand growth prospects in later posts).Despite sustainability pressures, the scale of demand for stuff bought online translated to a lot more consumption of virgin polymers.

Read More
Chemical Management

The supply-chain inflation threat to petrochemicals demand

Article | May 9, 2021

Petrochemicals themselves remain in short supply. This is partly because of reduced feedstock from refineries, a consequence of the pandemic-related collapse in transportation fuels demand.Global petrochemical supply is still edging back to something like normal following the US winter storms in February, during which most US capacity was shut down. A point of discussion is whether containers will become available in the right places at the right prices to relieve tightness in the European polyethylene (PE) market, once US supply has normalised. The container issue is making it difficult to move PE and polypropylene (PP) cargoes from Asia to Europe.Market intelligence from the US-based ICIS CDI team indicates that enough container freight space will be available to resume significant shipments of US PE to Europe, albeit at high prices. It will be several more weeks before domestic pipelines have been refilled, enabling US producers to refocus on exports, added CDI.

Read More

Spotlight

Mistras

In order to succeed in todays competitive business environment, industry must ensure the integrity of their products and processes in the most cost effective fashion possible. MISTRAS Services, formerly CONAM Inspection & Engineering Services, Inc. provides both standard and innovative nondestructive testing solutions to achieve these goals. We utilize the most economical solutions while employing highly trained professionals, state-of-the-art equipment, and sophisticated data analysis. For over 40 years MISTRAS Services has provided comprehensive Non-Destructive Testing services to a broad range of industries. With nationwide laboratories employing over 1000 technicians, our staff has experience with your industry's testing requirements. Constantly driven to be the best, MISTRAS Services' commitment to continuous improvement has helped thousands of companies enhance safety, increase productivity and reduce costs... we would like to do the same for you!

Related News

Chemical Management

LyondellBasell & MSI Technology, LLC Collaborate on Innovative Consumer Packaging

LyondellBasell | February 02, 2024

LyondellBasell and MSI Technology, LLC announced they have entered into an agreement for MSI Technology to serve the LyondellBasell Polybutene-1 (PB-1) resin line into consumer packaging applications for North America. MSI Technology is also the sales representative for the LyondellBasell Plexar product line. The expansion of the relationship is a strategic fit relative to the markets MSI Technology serves today. MSI Technology will use its technical sales approach combined with its current specialty product portfolio to enhance offerings to customers in consumer packaging. LyondellBasell PB-1 resins are commonly used in consumer packaging applications for easy-open packaging and film modification for seal initiation temperature providing Broad seal-peel temperature range Consistent and reproducible peel performance Adjustable peel force to end-use requirements Similar initiation and propagation peel force "Whitening" with "Smooth & Clean" peel surface Good seal integrity Easy processability Usable in blown film, cast film, extrusion coating and sheet extrusion "At LyondellBasell, we're passionate about creating solutions for everyday sustainable living," said Palmer Giddings, vice president Polymers at LyondellBasell. "Collaborating with MSI Technology on innovative packaging solutions is a major step forward in achieving that goal." "We are thrilled to expand our collaboration with LyondellBasell," said Brian McCaghy, president of MSI Technology. "The PB-1 resins align perfectly with our mission to provide specialty polymers and solutions to the packaging industry." The PB-1 resin line is part of MSI Technology's product offerings. The company also provides clients with access to dedicated sales and technical service specialists who provide guidance on technical resin selection to meet customer requirements. About LyondellBasell We are LyondellBasell – a leader in the global chemical industry creating solutions for everyday sustainable living. Through advanced technology and focused investments, we are enabling a circular and low carbon economy. Across all we do, we aim to unlock value for our customers, investors and society. As one of the world's largest producers of polymers and a leader in polyolefin technologies, we develop, manufacture and market high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. About MSI Technology, LLC MSI Technology specializes in the sales, marketing, and development of specialty polymers. Our product lines include: Plexar tie-layer adhesives (manufactured by LyondellBasell), SPS peelable sealants, and SpeciPurge purging compound. MSI Technology and its sister company, Soarus LLC, are located in Arlington Heights, IL. Soarus markets Soarnol™), ethylene vinyl alcohol copolymer (EVOH), (manufactured by Mitsubishi Chemical Group) into North and Latin America. The two companies together provide sales and technical service for specialty polymers focused on the packaging market.

Read More

Chemical Management

Charter Next Generation Launches GreenArrow™ Cavitated Recycle-Ready PE Films For Confectionery Applications Using Void Technologies'

Charter Next Generation | January 30, 2024

Charter Next Generation (CNG), a leading provider of sustainable films, announced that it has expanded its GreenArrow portfolio with a new line of cavitated polyethylene (PE) films. Developed in collaboration with VOID Technologies (VOID), the new recycle-ready films meet the rapidly growing demand for flow wrap and confectionery applications. Using VOID's patented VO+™ PE Voiding Agent Masterbatch and Machine Direction Orientation (MDO) film processing, CNG has successfully developed high-performing PE film structures that are opaque yet compatible with existing PE recycling streams making more packaging suitable for recycling. Adoption of MDO PE film is a rapidly growing industry trend as it enables recyclable, high-performing flexible packaging. By using VO+ Masterbatch, CNG can now produce thin gauge voided MDO PE films that offer a combination of low density and high opacity not achievable with mineral additives such as TiO2 pigments or CaCO3 cavitation agents. This innovation creates a unique PE-based recycle-ready alternative to conventional PP-based substrates that often require biaxial orientation. "CNG continues to raise the bar and re-invent packaging with a sustainability-first mindset. Using VOID's patented VO+ technology enables us to achieve the high opacity, ease of processing, and recycle-ready performance we are targeting for these films. This in turn allows our customers to reduce their use of virgin materials and process their packaging in existing polyethylene film recycling streams," said Brent Greiner, Vice-President of Technology at Charter Next Generation. The VO+ PE Masterbatch is added to PE resin to create nano and micro-scale voids, reducing density and creating high levels of opacity via light scattering through the voided structure. VOID's latest VO+ PE Masterbatch product is compliant with direct food contact standards in North America and Europe and has passed key recycling standards. James Gibson, CEO of VOID Technologies, commented, "CNG is a highly innovative and forward-thinking company. We are delighted with this collaboration and to be part of launching this new generation of recycle-ready voided PE films. As we look to the future, we are excited to be working with CNG across a range of projects that directly address sustainability and recycling targets." About Charter Next Generation Charter Next Generation (CNG) is North America's leading producer of highly engineered solutions used in the food, consumer, healthcare, and industrial markets. Committed to a sustainability-first approach, CNG leverages material science to engineer materials that help companies meet and exceed their sustainability goals. Known for world-class manufacturing capabilities and an innovation-driven approach, CNG operates fifteen facilities and employs over 2,200 employees and is a proud partner of Ownership Works®—a nonprofit partnering with companies to enable shared ownership, granting employees a stake in the value they create. About VOID Technologies VOID is a materials science company accelerating the transition to more sustainable plastics and packaging. The company combines its VO+ cavitation technology and R&D labs to help plastic and packaging companies rapidly develop new innovative products with a reduced environmental footprint. VOID's extensively patented VO+ technology was first conceived as part of a research initiative at Kimberly-Clark. Soon after, in 2015, VOID was launched as an independent company. Today, VOID has R&D labs and a compound manufacturing facility based in Neenah, Wisconsin (USA) and has commercial teams in Canada, France, and the UK.

Read More

Chemical Management

Infinium and Amogy Team Up to Spearhead Green Ammonia and eFuels Solutions

Infinium | January 25, 2024

Leading eFuels provider Infinium and Amogy Inc. ("Amogy"), a pioneer of carbon-free, energy-dense power solutions, have entered into a memorandum of understanding (MOU) to explore opportunities to integrate their technologies and develop commercial applications across the eFuels and green ammonia value chain. Infinium and Amogy are also exploring collaborations with both Mitsubishi Heavy Industries (MHI) Group and SK Innovation for deployment of the integrated solution. To accelerate the decarbonization of heavy industry sectors, the companies will jointly study and identify the most suitable applications to deploy their eFuels and green ammonia solutions. A key focus of this collaboration is the potential integration of Amogy's ammonia-cracking technology to provide low-cost, accessible green hydrogen feedstock as an input to produce Infinium's eFuels. Infinium eFuels, also known as electrofuels or Power-to-X, are made from green hydrogen and waste carbon dioxide (CO2) in a proprietary process. Amogy's ammonia-cracking technology leverages its state-of-the-art catalyst materials to crack ammonia into hydrogen and nitrogen at lower reaction temperatures with high durability, reducing heating and maintenance requirements. Upon identifying promising applications, Infinium and Amogy will initiate strategic pilot programs, showcasing tangible and scalable implementations of their clean technology solutions. The partnership also entails the evaluation of additional opportunities for collaboration within the eFuels and ammonia spaces, with a focus on the development of commercial use cases. "Ingenuity and collaboration are critical to creating decarbonization solutions today. Our partnership with Amogy will go a long way toward helping advance our ability to rapidly scale the production of ultra-low carbon Infinium eFuels, including eSAF, eDiesel and eNaphtha," said Robert Schuetzle, CEO at Infinium. "We are thrilled to forge this alliance with Infinium. By uniting our expertise and resources, we aim to unlock innovative opportunities that will pave the way for sustainable solutions," says Seonghoon Woo, CEO of Amogy. "This partnership reflects a shared commitment to accelerating technologies that can contribute to the reduction of carbon emissions in the heavy industry sectors." Mitsubishi Heavy Industries (MHI) has invested in both Infinium and Amogy and is exploring potential collaboration for new solutions and applications in energy sector project development. "Decarbonizing heavy industries requires numerous approaches that can concurrently and collaboratively help mitigate greenhouse gas emissions," said Ricky Sakai, Senior Vice President of New Business Development at MHI of America. "We are excited to see how Amogy's emission-free, energy-dense ammonia solution and Infinium's proprietary eFuels production process might be aligned to overcome challenges and accelerate the global availability of commercial decarbonization solutions." SK Trading International (SKTI) invests in solutions that contribute to addressing climate change and environmental pollution and is an investor in Infinium while its parent company SK Innovation has invested in Amogy. "Our global goals to slow the warming of the planet require significant efforts so they can quickly scale, find synergies, and explore new pathways," said Hyunchol Park, Managing Director and Head of Global Trading at SKTI. "Infinium and Amogy are leaders in their progress and proven solutions, and I believe their partnership will result in the identification of breakthrough opportunities to expand and grow access to cleaner fuels." About Infinium Infinium is an electrofuels provider on a mission to decarbonize the world. Electrofuels are a new class of synthetic fuels made using renewable power and waste carbon dioxide, not petroleum or resources needed to produce food. Infinium electrofuels can be dropped into existing trucks, planes and ships, significantly reducing harmful carbon dioxide emissions compared to fossil-based fuels. In addition to helping the transport industry meet carbon reduction goals, Infinium electrofuels are a lower carbon alternative for chemical processing, including plastics production. About Amogy Founded in 2020, Amogy is on a mission to unlock the potential of ammonia as a clean energy source, accelerating the global journey to Net Zero and sustaining future generations. With a presence in Brooklyn, Houston, Norway, and Singapore, Amogy is developing fully integrated ammonia-to-power systems to enable the decarbonization of the hard-to-abate sectors, such as shipping, power generation, and heavy-duty transportation.

Read More

Chemical Management

LyondellBasell & MSI Technology, LLC Collaborate on Innovative Consumer Packaging

LyondellBasell | February 02, 2024

LyondellBasell and MSI Technology, LLC announced they have entered into an agreement for MSI Technology to serve the LyondellBasell Polybutene-1 (PB-1) resin line into consumer packaging applications for North America. MSI Technology is also the sales representative for the LyondellBasell Plexar product line. The expansion of the relationship is a strategic fit relative to the markets MSI Technology serves today. MSI Technology will use its technical sales approach combined with its current specialty product portfolio to enhance offerings to customers in consumer packaging. LyondellBasell PB-1 resins are commonly used in consumer packaging applications for easy-open packaging and film modification for seal initiation temperature providing Broad seal-peel temperature range Consistent and reproducible peel performance Adjustable peel force to end-use requirements Similar initiation and propagation peel force "Whitening" with "Smooth & Clean" peel surface Good seal integrity Easy processability Usable in blown film, cast film, extrusion coating and sheet extrusion "At LyondellBasell, we're passionate about creating solutions for everyday sustainable living," said Palmer Giddings, vice president Polymers at LyondellBasell. "Collaborating with MSI Technology on innovative packaging solutions is a major step forward in achieving that goal." "We are thrilled to expand our collaboration with LyondellBasell," said Brian McCaghy, president of MSI Technology. "The PB-1 resins align perfectly with our mission to provide specialty polymers and solutions to the packaging industry." The PB-1 resin line is part of MSI Technology's product offerings. The company also provides clients with access to dedicated sales and technical service specialists who provide guidance on technical resin selection to meet customer requirements. About LyondellBasell We are LyondellBasell – a leader in the global chemical industry creating solutions for everyday sustainable living. Through advanced technology and focused investments, we are enabling a circular and low carbon economy. Across all we do, we aim to unlock value for our customers, investors and society. As one of the world's largest producers of polymers and a leader in polyolefin technologies, we develop, manufacture and market high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. About MSI Technology, LLC MSI Technology specializes in the sales, marketing, and development of specialty polymers. Our product lines include: Plexar tie-layer adhesives (manufactured by LyondellBasell), SPS peelable sealants, and SpeciPurge purging compound. MSI Technology and its sister company, Soarus LLC, are located in Arlington Heights, IL. Soarus markets Soarnol™), ethylene vinyl alcohol copolymer (EVOH), (manufactured by Mitsubishi Chemical Group) into North and Latin America. The two companies together provide sales and technical service for specialty polymers focused on the packaging market.

Read More

Chemical Management

Charter Next Generation Launches GreenArrow™ Cavitated Recycle-Ready PE Films For Confectionery Applications Using Void Technologies'

Charter Next Generation | January 30, 2024

Charter Next Generation (CNG), a leading provider of sustainable films, announced that it has expanded its GreenArrow portfolio with a new line of cavitated polyethylene (PE) films. Developed in collaboration with VOID Technologies (VOID), the new recycle-ready films meet the rapidly growing demand for flow wrap and confectionery applications. Using VOID's patented VO+™ PE Voiding Agent Masterbatch and Machine Direction Orientation (MDO) film processing, CNG has successfully developed high-performing PE film structures that are opaque yet compatible with existing PE recycling streams making more packaging suitable for recycling. Adoption of MDO PE film is a rapidly growing industry trend as it enables recyclable, high-performing flexible packaging. By using VO+ Masterbatch, CNG can now produce thin gauge voided MDO PE films that offer a combination of low density and high opacity not achievable with mineral additives such as TiO2 pigments or CaCO3 cavitation agents. This innovation creates a unique PE-based recycle-ready alternative to conventional PP-based substrates that often require biaxial orientation. "CNG continues to raise the bar and re-invent packaging with a sustainability-first mindset. Using VOID's patented VO+ technology enables us to achieve the high opacity, ease of processing, and recycle-ready performance we are targeting for these films. This in turn allows our customers to reduce their use of virgin materials and process their packaging in existing polyethylene film recycling streams," said Brent Greiner, Vice-President of Technology at Charter Next Generation. The VO+ PE Masterbatch is added to PE resin to create nano and micro-scale voids, reducing density and creating high levels of opacity via light scattering through the voided structure. VOID's latest VO+ PE Masterbatch product is compliant with direct food contact standards in North America and Europe and has passed key recycling standards. James Gibson, CEO of VOID Technologies, commented, "CNG is a highly innovative and forward-thinking company. We are delighted with this collaboration and to be part of launching this new generation of recycle-ready voided PE films. As we look to the future, we are excited to be working with CNG across a range of projects that directly address sustainability and recycling targets." About Charter Next Generation Charter Next Generation (CNG) is North America's leading producer of highly engineered solutions used in the food, consumer, healthcare, and industrial markets. Committed to a sustainability-first approach, CNG leverages material science to engineer materials that help companies meet and exceed their sustainability goals. Known for world-class manufacturing capabilities and an innovation-driven approach, CNG operates fifteen facilities and employs over 2,200 employees and is a proud partner of Ownership Works®—a nonprofit partnering with companies to enable shared ownership, granting employees a stake in the value they create. About VOID Technologies VOID is a materials science company accelerating the transition to more sustainable plastics and packaging. The company combines its VO+ cavitation technology and R&D labs to help plastic and packaging companies rapidly develop new innovative products with a reduced environmental footprint. VOID's extensively patented VO+ technology was first conceived as part of a research initiative at Kimberly-Clark. Soon after, in 2015, VOID was launched as an independent company. Today, VOID has R&D labs and a compound manufacturing facility based in Neenah, Wisconsin (USA) and has commercial teams in Canada, France, and the UK.

Read More

Chemical Management

Infinium and Amogy Team Up to Spearhead Green Ammonia and eFuels Solutions

Infinium | January 25, 2024

Leading eFuels provider Infinium and Amogy Inc. ("Amogy"), a pioneer of carbon-free, energy-dense power solutions, have entered into a memorandum of understanding (MOU) to explore opportunities to integrate their technologies and develop commercial applications across the eFuels and green ammonia value chain. Infinium and Amogy are also exploring collaborations with both Mitsubishi Heavy Industries (MHI) Group and SK Innovation for deployment of the integrated solution. To accelerate the decarbonization of heavy industry sectors, the companies will jointly study and identify the most suitable applications to deploy their eFuels and green ammonia solutions. A key focus of this collaboration is the potential integration of Amogy's ammonia-cracking technology to provide low-cost, accessible green hydrogen feedstock as an input to produce Infinium's eFuels. Infinium eFuels, also known as electrofuels or Power-to-X, are made from green hydrogen and waste carbon dioxide (CO2) in a proprietary process. Amogy's ammonia-cracking technology leverages its state-of-the-art catalyst materials to crack ammonia into hydrogen and nitrogen at lower reaction temperatures with high durability, reducing heating and maintenance requirements. Upon identifying promising applications, Infinium and Amogy will initiate strategic pilot programs, showcasing tangible and scalable implementations of their clean technology solutions. The partnership also entails the evaluation of additional opportunities for collaboration within the eFuels and ammonia spaces, with a focus on the development of commercial use cases. "Ingenuity and collaboration are critical to creating decarbonization solutions today. Our partnership with Amogy will go a long way toward helping advance our ability to rapidly scale the production of ultra-low carbon Infinium eFuels, including eSAF, eDiesel and eNaphtha," said Robert Schuetzle, CEO at Infinium. "We are thrilled to forge this alliance with Infinium. By uniting our expertise and resources, we aim to unlock innovative opportunities that will pave the way for sustainable solutions," says Seonghoon Woo, CEO of Amogy. "This partnership reflects a shared commitment to accelerating technologies that can contribute to the reduction of carbon emissions in the heavy industry sectors." Mitsubishi Heavy Industries (MHI) has invested in both Infinium and Amogy and is exploring potential collaboration for new solutions and applications in energy sector project development. "Decarbonizing heavy industries requires numerous approaches that can concurrently and collaboratively help mitigate greenhouse gas emissions," said Ricky Sakai, Senior Vice President of New Business Development at MHI of America. "We are excited to see how Amogy's emission-free, energy-dense ammonia solution and Infinium's proprietary eFuels production process might be aligned to overcome challenges and accelerate the global availability of commercial decarbonization solutions." SK Trading International (SKTI) invests in solutions that contribute to addressing climate change and environmental pollution and is an investor in Infinium while its parent company SK Innovation has invested in Amogy. "Our global goals to slow the warming of the planet require significant efforts so they can quickly scale, find synergies, and explore new pathways," said Hyunchol Park, Managing Director and Head of Global Trading at SKTI. "Infinium and Amogy are leaders in their progress and proven solutions, and I believe their partnership will result in the identification of breakthrough opportunities to expand and grow access to cleaner fuels." About Infinium Infinium is an electrofuels provider on a mission to decarbonize the world. Electrofuels are a new class of synthetic fuels made using renewable power and waste carbon dioxide, not petroleum or resources needed to produce food. Infinium electrofuels can be dropped into existing trucks, planes and ships, significantly reducing harmful carbon dioxide emissions compared to fossil-based fuels. In addition to helping the transport industry meet carbon reduction goals, Infinium electrofuels are a lower carbon alternative for chemical processing, including plastics production. About Amogy Founded in 2020, Amogy is on a mission to unlock the potential of ammonia as a clean energy source, accelerating the global journey to Net Zero and sustaining future generations. With a presence in Brooklyn, Houston, Norway, and Singapore, Amogy is developing fully integrated ammonia-to-power systems to enable the decarbonization of the hard-to-abate sectors, such as shipping, power generation, and heavy-duty transportation.

Read More

Events