5 Most Dangerous Chemicals Known To Man

| April 26, 2017

article image
Most dangerous chemicals in the world. Know about the toxic chemicals ever known to man. These hazardous chemicals can even cost your life. Beware

Spotlight

Sitara Chemical Industries Limited

SCIL was incorporated in 1981 and began producing caustic soda in 1985, initially at a rate of 30 metric tones Caustic a day. The plant’s capacity was gradually increased over years to current level of 610 metric tones a day.In addition, various by-product facilities have been added and expanded from time to time to cope with growing demand. Company entered into Textile Spinning Business in 1995. Its specialty chemicals and export division was established in 2001 and agri chemicals division in 2003.

OTHER ARTICLES

Why chemical characterization is the best way to assess patient risk

Article | February 11, 2020

Everyone is very familiar with the phrase when buying a house: All that really matters are three things - location, location, and location. This same principle applies to extractables and leachables chemistry analysis – the three things that truly matter are identification, identification, and identification. The greatest growth in the past ten years in demonstrating the safety of medical devices and container closure systems for drugs has been using analytical chemistry to determine what chemicals can leach from the device and what the patient is exposed to during its intended use.

Read More

Resin and Polymeric Binders for Inks

Article | May 19, 2021

The market size for polymeric and resin binders in the global printing ink marketwas estimated to be over 1,200,000 MT in 2020, with a CAGR of about five percent. A major driver of this growth comes from the packaging industry, due to increases in consumer spending and online shopping, as well as demand for processed and packaged foods and beverages. In addition, increased use of water-based inks is promoting market growth, off-setting environmental and health concerns regarding solvent-based inks in addition to strict environmental protection policies. Water-based inks are projected to overtake solvent-based inks due to environmental regulations, the reduction of volatile organic compounds (VOCs) in the pressroom, and improvements in overall print quality. Ink formulations are complex mixtures, consisting of four basic component classes: pigments, polymeric binder resins, solvents or an aqueous dispersant media, and additives, such as surfactants, waxes, and rheology modifiers that enhance print quality. The purpose of the resin binder is to disperse and carry the ink pigment to the substrate, stabilize the pigment and additives dispersion to prevent settling, and provide print properties such as ink transfer behavior, setting, and drying characteristics. The binder also contributes surface appearance and gloss, strength and flexibility, chemical and solvent resistance, and also rub resistance. Ink binders can be categorized into the following polymer and resin types: acrylics, polyurethanes, polyamides, modified resins, hydrocarbon resins, and modified cellulosics.

Read More

THE BENEFITS OF CHEMICAL FOAMERS, AND HOW BEST TO USE THEM TO MAXIMISE PRODUCTION

Article | April 14, 2020

Downhole fluid build-up coupled with a drop in reservoir pressure can lead to the rapid decline of gas production rates, and can ultimately result in a well ceasing production. While there are many ways to deliquify a well to maximise production, chemical foamers can be incredibly effective and well worth considering. In this blog post, Kevin Lonie shares some of the benefits of using chemical foamers, and provides insights and advice around how best to use them… “Foamers are a much cheaper option than alternative solutions, such as mechanical lifts, and there is very little risk associated with their usage. If a foamer doesn’t work, it won’t make the well worse - so often we see clients giving them a go before opting for more expensive methods, in the hope that they produce the desired results. And we have seen their success over and over again.”

Read More

What Are Fine Chemicals?

Article | March 27, 2020

The initial versions of drugs were produced by extracting substances from natural herbs and other plants. As understanding and technology in chemistry continued to grow, scientists figured out to isolate and extract a lot more individual compounds from raw materials. The complicated processes that produce these simple, pure substances form the field of fine chemistry. The chemical industry is separated into branches, with fine chemicals serving as the smallest segment of them. Its companions are commodities and specialty chemicals. Commodity chemicals are those that are mass-produced on a big scale to supply global markets. They include general compounds that are the same from supplier to supplier. Specialty chemicals usually are sold as brand name products and are advertised for their distinct qualities and their abilities to carry out functions that other chemicals cannot. They are composed of one or more fine chemicals.

Read More

Spotlight

Sitara Chemical Industries Limited

SCIL was incorporated in 1981 and began producing caustic soda in 1985, initially at a rate of 30 metric tones Caustic a day. The plant’s capacity was gradually increased over years to current level of 610 metric tones a day.In addition, various by-product facilities have been added and expanded from time to time to cope with growing demand. Company entered into Textile Spinning Business in 1995. Its specialty chemicals and export division was established in 2001 and agri chemicals division in 2003.

Events